Unlimited possible

Frequently Asked Qutsions

For MM fiber Typical lose is 0.01 dB, for SM Fiber Typical Lose 0.02 dB

Normally, electrodes lifetime is 3000-4000 splices, also you have spare electrodes with the package.

For NY-90S, 7 seconds for splicing, 9 Seconds for heating, and for NY-A7, 9 seconds for splicing, 21 seconds for heating, and all can be according to sleeve size and material.

ALOYK fusion Splicer can splice all types of single core fiber optics cables, using PAS core to core alignment system.

For Our OTDR, NY-9000 super OTDR, it can automatically generate reports including, General information (Project details, Time and date, Splicer name), Link information (start point, End point, cable type, fiber ID, cable parameters), Test information ( wavelengths, Pulse width, duration) and test results ( link length, event table, connector lose, total lose, attenuation, pass/Fail).

Yes, NY-9000 super OTDR will export tow types of reports automatically, source file and pdf file.

All Of Your Equipment From One place

ALOYK is R&D Specialized in Optical Fiber Equipment Based on Global Market FeedBack , and Latest Researches .

About ALOYK

About Us

ALOYK R&D Communication equipment, testers & tools. By adding our research and the results of our industry surveys into the development process, we are able to produce advanced quality equipment that is designed with telecom developers and operators in mind.

Factory Certificates

We Are Certified

Why choose us

Why ALOYK

Whether you are a Telecom Operator, Activator, or Contractor, we have three benchmarks of service to support you:

Online Check

Check warranty

Great News!

You’re getting the fastest internet
in your neighborhood!

We found an service miles away from you. We’re eager to get you connected, but we need to do a little research first to verify that your address can be served by Netfx.

    I am a customer.

    A local Netfx representative will be in your area to survey your location to see if you can receive Wave service. If your location is serviceable, we will contact you as soon as possible.

    We're Sorry, No Service is Available - Yet!

    NetFx service is not available yet at your address. But we’re always expanding our services everyday! Spread the word about NetFx to your neighbors, friends and work colleagues, and we'll do our best to serve your address as soon as we can.

    If you think you reached this page in error, you can re-check availability or check availability for a different address. You can also give us a call at 077-777-7777

    Add your name to our waitlist, and we’ll let you know when we get to your area.

      We promise – we'll never share your information without your consent. Not now, not ever.


      Check Certificate

      Great News!

      You’re getting the fastest internet
      in your neighborhood!

      We found an service miles away from you. We’re eager to get you connected, but we need to do a little research first to verify that your address can be served by Netfx.

        I am a customer.

        A local Netfx representative will be in your area to survey your location to see if you can receive Wave service. If your location is serviceable, we will contact you as soon as possible.

        We're Sorry, No Service is Available - Yet!

        NetFx service is not available yet at your address. But we’re always expanding our services everyday! Spread the word about NetFx to your neighbors, friends and work colleagues, and we'll do our best to serve your address as soon as we can.

        If you think you reached this page in error, you can re-check availability or check availability for a different address. You can also give us a call at 077-777-7777

        Add your name to our waitlist, and we’ll let you know when we get to your area.

          We promise – we'll never share your information without your consent. Not now, not ever.

          Network Packages

          Technical Tips

          #

          Technical Tips

          • When we need to clean V-groove?
          • Normally this is part of preventive maintenance, that should be followed each six months of use, or when you face motor overrun or motor stoppage, that can be caused by dust that will block fiber moving.
          • What do we need to clean V-groove
          • Alcohol bottle
          • Knife
          • Dust blowing ball.
          #

          Technical Tips

          • Prepare: replacing the electrode, the user needs to “ turn off the power of splicing machine” --- “ Loosen the screw that is fixed to the electrode cover” ---- “remove the electrode”.
          • Install the new electrode into the electrode slot, install the electrode cover, slowly tighten the screws
          • After installed, please check Whether the two electrode connecting is within the horizontal plane, while in the vertical surface; if not, please reinstall the electrode.
          • When finished install, Turn on the power and place the prepared fiber on the welder. Enter Menu page -> select Equipment Maintenance ->
          #

          Technical Tips

          • When we need to clean V-groove?
          • Normally this is part of preventive maintenance, that should be followed each six months of use, or when you face motor overrun or motor stoppage, that can be caused by dust that will block fiber moving.
          • What do we need to clean V-groove
          • Alcohol bottle
          • Knife
          • Dust blowing ball.
          #

          Technical Tips

          • Prepare: replacing the electrode, the user needs to “ turn off the power of splicing machine” --- “ Loosen the screw that is fixed to the electrode cover” ---- “remove the electrode”.
          • Install the new electrode into the electrode slot, install the electrode cover, slowly tighten the screws
          • After installed, please check Whether the two electrode connecting is within the horizontal plane, while in the vertical surface; if not, please reinstall the electrode.
          • When finished install, Turn on the power and place the prepared fiber on the welder. Enter Menu page -> select Equipment Maintenance ->
          Testimonials

          Our client love us!

          "
          ALOYK is the most reliable equipment in fiber optics we have ever used, along 3 years of use in different conditions, we didn’t face any stoppage or defect, despite the tough environmental conditions in our area.
          "
          It's wonderful to have a fusion splicer that doesn’t need to be charged for more than six months, just keep with you in your car and feel safe.
          "
          Our experience with ALOYK R&D in Testers and tools was over satisfying, presales team has offered us more tools than we requested, it was not in our consideration, but it was really helpful, and we believe that its necessary for every team.

          Request a call back

          We are committed to providing excellent service and creating a stress-free experience for our customers.